What it sounds like
A night train, heard from a seat in a carriage. A deep, dark rumble fills the floor, growing a little louder as the train speeds up and settling as it slows. Over it, the wheels cross rail joints: da-dum … da-dum, a pair from the front bogie and a pair from the back, softer copies from the next carriages. Some stretches of track are jointed and clatter; others are welded and run smooth for a while. Now and then something rattles under the floor, a rough patch shakes the carriage for a second or two, or the sound closes in as the train enters a tunnel.
How it is made
Nightjar makes its sound live on the iPhone: none of it is a recording and none of it loops. The train was rebuilt for the fourth time in 2026, against recordings of real carriage interiors. An earlier version had metal that rang on every hit and sounded machine-made, so nothing in this one is a pitch you can follow.
The rumble. Noise in eight bands from 62 Hz to 7 kHz, fitted to the quiet moments of real interiors rather than their loud ones: strongest at 60 to 80 Hz, far quieter above. It grows with speed and drifts on its own over seconds, with the rhythm of the wheels and the sleepers in its texture. About every three minutes there is a tunnel, 6 to 18 seconds of a closer, louder roar.
The carriage. Six soft resonances between 300 Hz and 2.9 kHz, each swelling on its own, the faint stripes you see in a picture of a real train’s sound.
The joints, which are geometry. Rails are 19 to 25 metres long and the train runs at 20 to 29 metres a second, so a joint passes every 0.7 to 1.2 seconds. A coach has two bogies 15 to 19 metres apart with two axles each, so one joint makes four hits in two close pairs. The speed wanders by about 8 per cent over 12 to 35 seconds, so the rhythm drifts. Stretches of track are jointed, half-welded or welded, so the clacks come in runs and gaps, and every joint has its own gap, its own offset between the two rails and its own condition. A hit is a soft thud of noise, not a ring.
The rest. About three times every ten seconds a streak of something under the floor; every twelve seconds or so a rough patch of a second or two; and a little reverberation on the hits.
Soft for sleep. Its loudest moments stand 9 to 10 dB over its ordinary level, at the gentle end of real trains.
When people use it
Sleep. Many people sleep well on trains and miss the sound at home. In Nightjar the train rolls over a low brown-noise bed in Night Train, an hour-long sleep track, and Sleeper in the Rain adds rain on the window. Train sounds for sleep has more.
Focus. Quiet Carriage is a 60-minute focus block with the train, brown noise and a slow pulse.
It never repeats, unlike a ten-hour video built from a short clip. Keep it about as loud as a quiet conversation or lower, and use the timer above to fade it.
Tracks with train in them
What research says
- Comfort sound
Ambient sounds
No research reviewed. Many people find these sounds calming; this is comfort, not a treatment.
Not reviewed
These are the app's own notes, last checked against the research on 30 Oct 2026. Labels: what each one means.
Questions
What makes the clickety-clack of a train?
Rail joints. On jointed track the rails come in lengths of about 19 to 25 metres with a small gap between them, and every wheel knocks as it crosses a gap. A carriage has two bogies with two axles each, so one joint gives four hits in two close pairs: da-dum ... da-dum.
Why are the clacks so soft?
On purpose. The track is for sleep, and louder hits sounded less like a train and more like knocking. They are soft thuds of noise, mostly between 130 Hz and 1 kHz, under a deep rumble, and the loudest moments stand well below a real carriage's.
Is there a train horn?
No. There is no horn, no announcement, no brakes and no station. Only the carriage rolling on through the night.