What it sounds like
A wood fire in a hearth or a stove, from a chair nearby. Underneath is a warm, dark roar that breathes and now and then flares for a moment. Over it, the crackle: short, bright bursts, a few small ones at a time and now and then a big one with a smaller one or two right behind it. Every couple of seconds a hiss of gas or steam escapes from the wood, and a few times a minute the fire spits, a quick run of tiny clicks. Over minutes the whole fire grows a little hotter and louder, then settles.
How it is made
Nightjar makes its sound live on the iPhone: none of it is a recording and none of it loops. This is the third version of Nightjar’s fire. It was rebuilt against more than a dozen recordings of fireplaces, wood stoves and a campfire, after its earlier crackle sounded too dull and too small.
The roar. Noise in seven bands, from 85 Hz to 10 kHz, set so that an ordinary moment has the spectrum of an ordinary moment in real fire recordings: strong lows, and a top far quieter, so the bed is warm and dark and the crackle stands out of it. Each band wavers on its own time scale, as turbulence does. The whole flame breathes by about 2 dB over a second or so, and about three times a minute it flares.
The crackle. A crack is a short broadband burst, not a ring: it rises in about a tenth of a millisecond and dies within a few milliseconds, with a short tail and a faint trace of the room. About 18 cracks a second at an ordinary heat. Their sizes follow a power law, as crackling does in nature: many small, a few big. A small crack is high only; a big one opens the lower bands too. After a big crack, a third of the time one or a few more follow within a fraction of a second, and the rate follows the flame’s breathing, so the crackle comes in bursts and lulls.
Hisses and spits. A jet of gas or steam about every two seconds, lasting a fraction of a second, mostly between 2 and 10 kHz. Three times a minute, a spit of 5 to 18 tiny clicks.
Held down for sleep. The tops of the biggest cracks are rounded off, so the loudest moment of a minute stands about 9 to 11 dB over the fire’s ordinary level, where recorded fireplaces reach 12 to 37. Pops with a pitch and the whistle of escaping gas, which a few real fires have, are left out.
When people use it
Cosy evenings. Reading, a slow evening, a cold night. Cosy rain and fire and sounds for reading have ideas for both.
Sleep. In Nightjar the fire crackles with soft rain outside in Fireside, a 40-minute sleep track. Fireplace sounds covers what makes a crackle cosy rather than startling.
Fires elsewhere in the app. Tracks such as Hearth and Storm and Jazz by the Fire have fires of their own, and more are in Nights outside.
Keep it about as loud as a quiet conversation or lower, and use the timer above to fade it out.
Tracks with fire in them
What research says
- Comfort sound
Ambient sounds
No research reviewed. Many people find these sounds calming; this is comfort, not a treatment.
Not reviewed
These are the app's own notes, last checked against the research on 30 Oct 2026. Labels: what each one means.
Questions
Why does a real fire crackle?
Wood holds water, resin and pockets of gas. As it heats, they expand and burst through the wood, which makes the sharp cracks; steam and gas escaping through cracks make the hisses. That is why the crackle comes in clusters and lulls rather than a steady patter.
Is a crackling fire too sharp to sleep to?
A recorded fireplace can be: its loudest cracks stand 12 to 37 dB over its ordinary level. Here the loudest moment of a minute stands about 9 to 11 dB over it, so the crackle is clear but not jarring. Keep it quiet, or play Fireside, where rain and brown noise soften it further.
Can I hear a fire and rain together?
Yes. In the app, Fireside puts a crackling fire with soft rain outside and a warm pad, and the sleep sound mixer on this site layers fire with rain and other sounds.