How loud should white noise be for sleep?

Play it about as loud as a quiet background conversation or softer, with the source across the room rather than by your head. In numbers, that is roughly 40 to 50 dBA at the pillow; there is no official guideline, but sound at or below 70 dBA is unlikely to harm hearing, and sleep sounds should sit well under that. Set the level by turning it up until it covers the noise you mind, then one step down. If you need it louder than conversation to work, earplugs may serve you better.

Pink noise

A single sound, made live. Plays until you stop it.

The plain answer

Quiet. The Sleep Foundation’s advice is to start with the source in a corner of the room and set it to about the level of a background conversation or light rustling. There are no official guidelines for sleep sound, but nothing about sleep needs it to be loud. It only needs to be loud enough to cover the sounds you mind.

Press play above for pink noise, softer at the top than white noise, and try the test below with it.

The same thing in decibels

Decibels are a log scale: every 10 dB is roughly twice as loud to the ear. A few landmarks from the sources below, with A-weighting (dBA), which counts sound the way your ears do:

Level What it is
40 and 50 dBA The steady pink noise used through the night in a 2026 sleep-lab study
60 to 70 dBA Normal conversation, per the NIDCD
70 dBA or less Unlikely to cause hearing loss, even after long exposure (NIDCD)
85 dBA Long or repeated exposure can cause hearing loss (NIDCD)
94 to 110 dBA Music through headphones at maximum volume (NIDCD)

The NIDCD says sounds at or below 70 dBA are unlikely to cause hearing loss even after long exposure. For sleep, aim lower still: roughly 40 to 50 dBA at your pillow. In a 2026 sleep-lab study, steady pink noise at 40 and 50 dBA through the night reduced REM sleep in 25 adults. That is a reason to stay at the bottom of that range, and to use a timer.

Distance does most of the work

Sound falls off quickly with distance. A 2014 study measured 14 infant sleep machines at full volume: every one went above 50 dBA at 30 cm, and three went above 85 dBA, a level that would breach adult workplace limits over eight hours. Move the same machine to the far side of the room and the level at your ear drops a long way. Put your speaker or phone on a chest of drawers, not on the pillow or the bedside table by your head.

Set it in one minute

  1. Lie down with the lights off and the usual noises around you.
  2. Turn the sound up until the noise you mind (the road, the fridge, the radiator) blends into it.
  3. Turn it down one step. If it still covers the noise, try one more.
  4. Check you could hold a quiet conversation over it. If you would need to raise your voice, it is too loud.

If you can only cover the noise by going louder than conversation, the noise is too big to mask comfortably. Earplugs are the better tool then: in the same 2026 study they blocked nearly all the effects of intermittent night-time noise, and steady noise did not. Noisy neighbours and traffic noise have more on that.

On headphones

Through headphones the sound is right at your ear, so the same setting is louder. Go lower than on a speaker, keep it to half volume or less, and use a timer. The WHO and ITU standard for safe listening devices uses 80 dB for 40 hours a week as the adult limit; a sleep sound should be nowhere near it. The safe listening time calculator shows how quickly louder levels add up. Can white noise damage your hearing? has the detail.

Where Nightjar helps, and where it doesn’t

A volume cap is on by default, and Nightjar is not for infants. With Adapts to your room, the noise bed rises only when the room gets louder, then settles; the microphone is read for level only and nothing is recorded, stored or sent. That means the bed can stay low most of the night and lift only when the room does. Tune turns any sound down on its own, even parts of a track: the thunder apart from the rain, the saxophone apart from the piano.

Nightjar cannot measure the level at your pillow: your phone’s volume, the speaker and the room all change it. Use the test above, not the slider position, and remember that the right level for sleep is the lowest one that still works.

Sources

  1. Sleep Foundation, White Noise (updated 29 July 2025)
  2. Hugh and colleagues, Infant sleep machines and hazardous sound pressure levels, Pediatrics, 2014
  3. NIDCD (NIH), Noise-Induced Hearing Loss (updated 16 April 2025)
  4. Basner and colleagues, Efficacy of pink noise and earplugs for mitigating the effects of intermittent environmental noise exposure on sleep, Sleep, 2026
  5. WHO and ITU, Safe listening devices and systems: a WHO-ITU standard (H.870), 2019

Last checked 13 November 2026.

Questions

How many decibels should white noise be for sleep?

There is no official figure. A level of roughly 40 to 50 dBA at the pillow, about a quiet conversation or softer, is a sensible ceiling. Sleep-lab studies of steady noise have used 40 to 50 dBA, and even those levels changed sleep a little, so go no higher than you need.

Can I measure the level with my phone?

Roughly. Sound-meter apps on a phone are not calibrated instruments, but they show whether you are near 40 dBA or near 70. Measure at your pillow, not next to the speaker.

Is white noise too loud if I can hear it in the next room?

Not necessarily, since walls and doors change things. A better test is whether you could hold a quiet conversation over it at the bed. If you would have to raise your voice, it is too loud.